LED GUA SHA

5 LIT FACIALS TO LIFT GLOW AND DETOX

Facial 1: The Glow Booster (Vibrations + LED)

Prepping your skin with your preferred serum or face oil, get ready to glow!
Activate the facial massager with a single press to enjoy the gentle vibrations and revitalizing LED light.
Start from the center of your forehead and massage outward towards your temples. Try to keep the tool gliding and don't stop over the temple area. 3x on each side of the face
Glide the massager slowly from your nose to your ear, targeting the cheek area for a lifted and radiant look. 5x on each side of the face
Finish routine by resuming your skin care routine

Facial 2: The Skin Reviver (Heat + LED)

Begin with clean, dry skin and apply a light layer of your favorite facial oil or serum.
Press the power button twice to activate the soothing warmth and nourishing LED light.
Massage gently from your forehead to your temples, relieving tension and promoting relaxation. 3x on each side
Glide the massager slowly along your jawline to the chin, soothing and de-stressing your skin. 5x on each side
Take your time and indulge in this calming facial experience. Finish routine by resuming your skin care routine

Facial 3: The Repair Booster (Heat + Vibrations)

Prep your skin by applying facial oil or serum for an enhanced experience.
Activate the facial massager with three quick presses to enjoy the warming and invigorating vibrations.
Starting from your forehead, massage in upward motions for a forehead lift effect. 3x on each side
Focus on the jaw area, gently sculpting and toning for a more defined jawline. 5x on each side
Take 5-10 minutes to bask in this renewing facial. Finish routine by resuming your skin care routine

Facial 4: The Ultimate Rejuvenator (Heat + Vibrations + LED)

Apply your chosen facial oil or serum to reveal your skin's natural radiance.
Press the power button for the fourth time, experiencing the ultimate facial sensation.
Massage your forehead with upward strokes, providing a lifted and rejuvenated appearance. 3x on each side
Gently glide the massager along your cheeks, promoting a healthy and vibrant glow. 5x on each side
Luxuriate in this holistic facial treatment for 5-10 minutes. Finish routine by resuming your skin care routine

Facial 5: The Gua Sha Detoxifier

its' LIT doubles as a detoxifier for a complete facial experience.
With the tool on any mode, begin from the center of your forehead, gently gliding it's Lit tool upwards and outwards to release tension and promote lymphatic drainage. 5x on each side
Move down to your jawline and neck area, using the tool to decongest and stimulate circulation, revealing a refreshed and revitalized look. 5x on each side
Sculpt and tone along your cheekbones, enhancing the natural glow of your skin. 3x on each side
Embrace this detoxifying Gua Sha ritual, focusing on areas with congestion or puffiness, and let the red LED light enhance the benefits.

General Use Instructions:

Start with clean, dry skin.
Apply a small amount of face oil or serum to the skin.
Hold the facial massager tool comfortably in your hand.

Operation Modes:

Vibration and Red LED:
- Press the power button once to activate vibration and red LED mode.
- Gently massage your face in an outward direction away from the nose for 5-10 minutes.
- Enjoy the soothing vibration and benefits of red LED light therapy.
Heat and LED:
- Press the power button twice to activate heat and LED mode.
- Massage your face in the same outward direction while experiencing the gentle warmth and the nourishing effects of LED light.
Heat and Vibration:
- Press the power button three times to activate heat and vibration mode.
- Relish the relaxing massage with added heat for enhanced relaxation and vibrational benefits.
Combo Mode: Heat, Vibration, and Red LED:
- Press the power button for the fourth time to activate the ultimate combination of heat, vibration, and red LED.
- Experience the full pampering and rejuvenating effects of all three features in one mode.

Powering Off:

To turn off the facial massager tool, simply hold the power button down for 3 seconds.
Store the tool in a cool, dry place for future use.

Modes d’opérations

1. Appuyez le bouton marche pour des Vibrations + LED

2. Appuyez une 2ème fois pour Chauffage + LED

3. Appuyez une 3ème fois Chauffage + Vibrations

4. Appuyez une 4ème fois pour Chauffage + Vibrations + LED

5. Restez appuyé sur le bouton marche pendant 3 secondes à n’importe quel moment pour éteindre

Warnings and Precautions about LED light and using this tool:

For External Use Only: This electronic massager is intended for external use on the face and neck only. Do not use it on other body parts, sensitive areas, or mucous membranes.
Consult a Physician: Prior to using the electronic massager, consult with a physician or qualified healthcare professional, especially if you have any pre-existing medical conditions, skin conditions, or are pregnant. Individuals with pacemakers or electronic implants should avoid using the device.
Contraindications: The electronic massager is contraindicated for individuals with the following conditions:

a. Active skin infections, wounds, or lesions on the treatment area. b. Severe or uncontrolled hypertension or heart conditions. c. Neurological disorders or neuropathy affecting the facial area. d. Blood clotting disorders or individuals using blood-thinning medications. e. Recent facial surgery or cosmetic procedures (wait for appropriate healing time). f. Skin cancer or history of skin cancer in the treatment area. g. Severe or uncontrolled diabetes. h. Chronic migraines or severe headaches.
Keep Away from Children: This product is not intended for use by children. Store it in a secure location, out of reach of children, to prevent accidental misuse or choking hazards.
Avoid Extreme Pressure: Use gentle and moderate pressure during the massage. Applying excessive force can lead to skin irritation, bruising, or tissue damage.
Sensitive Skin: Individuals with sensitive skin should perform a patch test before using the electronic massager on a larger area with red light turned ON. If irritation, redness, swelling, or discomfort occurs, discontinue use and seek medical advice.
Product Temperature: Take care when using the heat mode. Do not use the product if it feels too hot or uncomfortable on the skin. Allow the device to cool down before reusing.
Avoid Water Exposure: The electronic massager is not water-resistant. Keep it away from water, moisture, and other liquids to prevent damage and potential electric shock hazards.
Battery Safety: Use the specified battery type as indicated in the product manual. Do not attempt to disassemble or modify the device, and ensure the battery is correctly inserted to avoid the risk of fire or explosion.
Pregnancy and Lactation: Pregnant or lactating women should refrain from using the electronic massager, especially when utilizing heat or other features that could impact pregnancy or breastfeeding.
Medical Devices: Do not use the electronic massager in conjunction with other electronic medical devices or implants, as it may interfere with their operation.
Allergies: If you have known allergies to certain materials or substances, check the product's material composition and avoid use if allergic reactions may occur.
Unplugging and Storage: Always unplug and/or turn off the device after use unless its charging. Store it in a cool, dry place, away from direct sunlight, extreme temperatures, or humidity.
Product Maintenance: Regularly inspect the massager for any signs of damage or wear. If any issues are detected, discontinue use immediately and seek professional assistance for repairs or replacements.

What are the wavelengths, irradiance, and power output of the device?

The irradiance value (30 mW/cm²) indicates the energy delivered per second to a square centimeter of the treated area.

This combination of wavelengths is designed for:

630 + 660 nm (Red): Stimulating collagen production, enhancing blood flow, and supporting healing.

420 nm (Blue): Targeting acne-causing bacteria and calming skin.

This device offers a balanced energy level suitable for safe and effective use on the scalp or skin. Let me know if you need more technical details!

My hat isn't charging

If you’re experiencing issues with charging, follow these steps to troubleshoot:

Please view this video HERE and read the below:

Avoid Apple Chargers:

Do not use an Apple charger, as its higher output can affect the hat’s battery. Instead, use a generic 5V 1/2Amp USB plug with the magnetic charging cord included in your box.

Magnetic Charger:

Connect the magnetic charge cord to your hat and plug it into a generic USB plug.
Charge the hat for 4 hours. While charging, the light will blink red. Once fully charged, the light will turn solid red.
When unplugged, the light should turn off completely. If it stays solid red after unplugging, please contact our customer service team.

USB Type-C Charging Option:

If the magnetic charging cord doesn’t work or seems glitchy, unplug (you can just pull it out ) the small round disk attached to the hat insert. This will reveal a USB Type-C (apple cord) port on the LED insert.
Use any USB Type-C cable (not an Apple plug) to charge your hat. The charging time and indicator lights are the same: blinking red while charging, solid red when complete, and off when unplugged.

Important Note: Ensure you try both charging methods (magnetic cord and USB Type-C) before reaching out to customer service. If the light continues to glow red after being unplugged, or if you’re unable to charge the hat using either method, please contact us for further assistance.

My insert glows solid red when unplugged

If the LED insert is glowing red after being unplugged, follow these steps to troubleshoot:

Check the Charging Methods:

First, try charging the hat using the magnetic charge cord included in the box. Ensure it’s connected to a generic USB plug (not an Apple charger). Charge for 4 hours until the light changes from blinking red (charging) to solid red (fully charged).
If the magnetic cord doesn’t work, unplug the small round disk on the hat mat to reveal the USB Type-C port. Use any USB Type-C cable with a generic USB plug to charge the hat.

Verify Charging Behavior:During charging, the light should blink red. When fully charged, it will turn solid red end eventually shut off. Once unplugged, the light should turn off completely.
Contact Customer Service:

If the light continues to glow red after being unplugged, even after trying both charging methods, please contact our customer service team for assistance please have your order number ready and if you can include a quick 15 second video how you have the hat on plug, unplug it and show how it glows red. Also be sure to mention the steps you’ve already tried to help us resolve the issue quickly.

We’re here to make sure your product functions as it should!

Usage instructions

Your hat should be used 3-5 times a week for one 10 minute daily sessions. Please use it on clean dry hair. One charge should work 4-8 sessions total.

How do I charge my hat?

Charging your hat is simple! Follow these steps:

Magnetic Charging (Cord included):

Connect the magnetic charging cord to the charging port on the hat.
Plug the USB end of the cord into any standard USB plug adapter that is 5V 1 or 2 A (amps) (not included). Make sure to avoid using an Apple charger, as its higher output can affect the battery.

USB Type-C Charging Option:

If you prefer, you can remove the tiny magnetic disk from the hat insert to reveal the USB Type-C port underneath.
Use any USB Type-C cable with a standard USB plug adapter to charge your hat. Again, avoid using Apple chargers.following the 5V 1/2A USB plug.

Charging Time and Behavior:

Charge for approximately 4 hours.
While charging, the indicator light will blink red. Once fully charged, the light will turn solid red.
After charging, unplug the hat from the power source. The hat will not function while plugged in.

For optimal performance, always ensure the hat is fully charged and unplugged before use!

How often do I charge the hat?

Charge your hat whenever the hat does not power on if it hasn’t been charged recently.

Here’s a general guideline:

After a full 4-hour charge, the hat should hold enough power for 4-8 sessions, depending on usage. Remember it shuts off after 10 minutes of use.
If the hat doesn’t turn on or the lights blink unexpectedly, it’s time to recharge.
If there is a solid red light when unplugged and not powered on troubleshoot the 'My insert glows red when unplugged' guide.

Tip: Avoid overcharging. Once fully charged (solid red light), unplug it to preserve battery health, as the hat won’t function while plugged in.

How do I clean my hat?

Cleaning your hat is simple and helps maintain hygiene. Follow these steps:

Remove the Insert:

Carefully take out the LED insert from the hat before cleaning.

Wipe Down:

Use a damp cloth to gently clean the surface of the hat and the LED insert.

The hat is not waterproof, so avoid soaking it or exposing it to excessive moisture.

Sanitize (Optional):

For extra cleanliness, use a small amount of alcohol on a cloth to sanitize the insert.

Recommendation: Clean your hat once a week or as needed. Ensure it is completely dry before reassembling and using.

What is the EMF of the hat?

Zero! We have tested it for your safety and it emits no EMF!

What is the return policy?

With our hat you have one month to use it and or change your mind! you also have a 1 year warranty that just requires your proof of purchase - no registration needed.

Can I use other treatments with my hat?

Yes! feel free to continue your treatment plans but ensure you use this on clean dry hair with no serum or product on the scalp. If you are unsure or you have a special condition always consult with a medical provider.

What is the difference between this hat and your other light therapy products?

LED Hat:

Designed for hands-free use and provides full scalp coverage.
Uses 630 nm + 660 nm red light and 420 nm blue light for hair follicle stimulation and scalp health.
Ideal for passive treatments while multitasking.
Recommended usage: 10 minutes per session, 3–5 times a week.

LED Brush:

Combines red light therapy with a vibrating massage to enhance blood circulation and improve absorption of scalp treatments.
Targets specific areas of concern (e.g., thinning spots).
Ideal for users who want manual stimulation alongside light therapy.

Cloud 9 Massager:

Offers red light therapy, vibration, and massage therapy prongs.
Focuses on scalp relaxation and circulation improvement, making it a great choice for scalp health and stress relief.
More versatile for scalp massage, but covers less surface area compared to the hat.

Key Difference: The hat delivers a broader, hands-free treatment, while the brush and Cloud 9 provide targeted therapy and additional features like massage for a more focused or interactive experience. Each tool suits different preferences and routines.

How many minutes should I use the red and blue light settings?

You can mix and match the red and blue light settings based on your needs, but don’t double the total usage time. We recommend:

15–30 minutes daily, 3–5 days a week.
Red light (630 + 660 nm): Supports hair growth and stimulates follicles.
Blue light (420 nm): Focuses on scalp health, soothing irritation, and targeting bacteria.
Feel free to switch between red and blue during sessions or alternate days.

How do I clean the LED brush?

To clean your brush:

Turn it off and unplug it from any power source.
Use a damp cloth to wipe the surface of the brush, including the prongs.
For extra sanitation, you can lightly use a cloth with a small amount of alcohol.
Ensure it’s completely dry before using again.
Note: The brush is not waterproof, so avoid submerging it in water.

What are the wavelengths of the brush?

The brush uses:

Red light: 630 nm + 660 nm
Blue light: 420 nm

What do the red and blue lights do?

Red light (630 + 660 nm): Penetrates the scalp to stimulate hair follicles, improve blood flow, and support healthier, thicker hair growth.
Blue light (420 nm): Targets the scalp’s surface, helping to calm irritation, reduce bacteria, and promote overall scalp wellness.

What’s the difference between the LED brush, hat, and Cloud 9?

LED Brush: Combines red and blue light therapy with vibration massage, allowing you to target specific areas of concern like thinning or irritated spots. Perfect for manual control and scalp treatment.
LED Hat: Provides hands-free, full scalp coverage with red and blue light therapy. Great for multitasking while treating your entire scalp.
Cloud 9 Massager: Focuses on relaxation and blood circulation with red light therapy, vibration, and massage therapy prongs, but covers less surface area than the brush or hat.

Each tool is tailored for different preferences—choose the one that best suits your routine!

How long does it take to see results with the LED brush?

Results vary by individual, but most users notice improvements in scalp health and reduced shedding within 4–6 weeks of consistent use. For visible changes in hair thickness or growth, it may take 3–6 months with regular use (15–30 minutes daily, 3–5 days a week).

How do I use the LED brush? Can I use it on wet hair or with oils/serums?

Use the brush on dry hair or damp hair (not dripping wet). Massage areas that need more density but try not to keep it on one spot for more than a few seconds.
Oils and serums are safe to use with the brush but should be lightweight and non-greasy to avoid buildup on the device.
Always clean the brush after using it with products to maintain hygiene and performance.

Can I use the LED brush alongside other hair growth treatments?

Yes, the LED brush can complement other treatments like growth serums or supplements. It helps improve product absorption and stimulate blood flow to enhance results.

What should I do if my brush stops working or won’t charge?

If you’re experiencing issues:

Ensure you’re using a compatible charger (avoid Apple plugs).
Check the charging cord and port for damage or debris.
If the issue persists, email our support team with:

We’re here to help ensure your device performs as expected.

Is the LED brush safe to use during pregnancy?

While LED light therapy is generally considered safe, we recommend consulting your doctor before use during pregnancy to ensure it’s appropriate for your specific needs.